We recently covered that the Redmi 8 in Russia has started getting MIUI 11.0.1.0 Russia stable ROM and now the same update has been rolled out to the Indian variants of the device. Xiaomi Redmi 8 (olive) MIUI 11.01.0 India stable ROM is now made available with version V11.0.1.0.QCNRUXM.

If your device is running on an India Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10. The Full firmware size is around 1.81 GB (Full Firmware -recovery). You can follow our guide to manually flash the full firmware on your device.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA. The new update improves the Localized payment security icon for India. It also fixes the “error message saying that IMEI couldn’t be identified appeared multiple times issue” and many others, please check the full changelog below.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi 8 MIUI 11.0.1.0 India Stable ROM.

MIUI 11.0.1.0 India Stable ROM – update details

• Device: Redmi 8
• Channel: Russia
• Version: V11.0.1.0.QCNRUXM

Changelog

System

• Updated Android Security Patch to July 2020. Increased system security.
• Stable MIUI based on Android 10

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi 8 MIUI 11.0.1.0 India Stable ROM

• MIUI 11.0.1.0 India Stable ROM for Redmi 8: Recovery ROM | Fastboot ROM

How To Install Redmi 8 MIUI 11.0.1.0 (v11.0.1.0.QCNRUXM) India Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Redmi 8 gets MIUI 11.0.1.0 India Stable ROM (v11.0.1.0.QCNRUXM) appeared first on Root My Galaxy.

The latest MIUI 12.0.2.0 Russia Stable ROM with version number V12.0.2.0.QFCRUXM and August 2020 security patch has been released for the Xiaomi Mi 9 Lite. The update is exclusive to Russia as the name of the update says.

If your device is running on a Russia Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Mi 9 Lite MIUI 12.0.2.0 Russia Stable ROM.

Image may be NSFW.
Clik here to view.

MIUI 12.0.2.0 Russia Stable ROM – August 2020 security patch update details

• Device: Mi 9 Lite
• Channel: Russia
• Version: V12.0.2.0.QFCRUXM
• Android: Android 10

Changelog

• Highlights
  • MIUI 12. Yours alone.
• System animations
  • New: All-new physically based animation engine with advanced architecture will refresh your device’s look.
  • New: Dynamic window technology takes switching screen orientation to a new level.
  • Optimization: Animations in selected scenes
• System visuals
  • Brand new visual design works for all types of content and languages.
  • Magazine-level layouts bring important things into the spotlight and make content structure clear.
• Control center
  • New: Swipe down from the upper left corner to open Notification shade and from the upper right corner to open Control center
  • New: When Notification shade is open, swipe down from the upper right corner to open Control center
  • Optimization: MIUI 11 custom toggle order is preserved after updating to MIUI 12
  • Fix: Some toggles disappeared from Control center in the editing mode
• Dark mode
  • Optimization: Brightness and color improvements for wallpapers in Dark mode
• System
  • Optimization: Full screen gestures are now ignored on the Lock screen alarm page
  • Fix: Home screen went black and started flashing after unlocking in some cases
  • Updated Android Security Patch to August 2020. Increased system security.
• Lock screen
  • Fix: Custom signature didn’t appear on the Lock screen
• Status bar, Notification shade
  • New: Screen lights up with an animation now
  • New: Status bar color gradient animation
  • Fix: Notification shade wasn’t displayed correctly in Dark mode
• Home screen
  • New: App drawer allows you to keep your Home screen neat and categorizes apps so you can find them faster.
• Weather
  • New: New animations bring the weather from outside directly to your screen.
• Settings
  • New: Security introduces new comprehensive privacy protection mechanisms.
  • New: Lite mode simplifies your device and brings essential features up front.
• Notes
  • New: You can create folders with notes now.
  • New: New dynamic backgrounds look gorgeous!
  • New: Tasks are completed with a satisfying animation now.
  • New: Checklists of subtasks make managing your agenda much simpler.
• Security
  • New: New animations feel natural and refreshing.
  • New: Binging your favorite shows will be more convenient with our new video toolbox

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Mi 9 Lite MIUI 12.0.2.0 Russia Stable ROM

How To Install Mi 9 Lite MIUI 12.0.2.0 Russia Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)
  • How To Install Stock Firmware OTA Update Zip / Fastboot Files On Xiaomi Devices

The post V12.0.2.0.QFCRUXM: Mi 9 Lite MIUI 12.0.2.0 Russia Stable ROM is live appeared first on Root My Galaxy.

The Xiaomi Mi 9 Lite has started receiving the MIUI 12.0.2.0 Europe Stable ROM (V12.0.2.0.QFCEUXM) with August 2020 security patch. The update is exclusive to Europe as the name of the update suggests. If your device is running on a Europe Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Mi 9 Lite MIUI 12.0.2.0 Europe Stable ROM.

MIUI 12.0.2.0 Europe Stable ROM – August 2020 security patch update details

• Device: Mi 9 Lite
• Channel: Europe
• Version: V12.0.2.0.QFCEUXM
• Android: Android 10

Changelog

• Highlights
  • MIUI 12. Yours alone.
• System animations
  • New: All-new physically based animation engine with advanced architecture will refresh your device’s look.
  • New: Dynamic window technology takes switching screen orientation to a new level.
  • Optimization: Animations in selected scenes
• System visuals
  • Brand new visual design works for all types of content and languages.
  • Magazine-level layouts bring important things into the spotlight and make content structure clear.
• Control center
  • New: Swipe down from the upper left corner to open Notification shade and from the upper right corner to open Control center
  • New: When Notification shade is open, swipe down from the upper right corner to open Control center
  • Optimization: MIUI 11 custom toggle order is preserved after updating to MIUI 12
  • Fix: Some toggles disappeared from Control center in the editing mode
• Dark mode
  • Optimization: Brightness and color improvements for wallpapers in Dark mode
• System
  • Optimization: Full screen gestures are now ignored on the Lock screen alarm page
  • Fix: Home screen went black and started flashing after unlocking in some cases
  • Updated Android Security Patch to August 2020. Increased system security.
• Lock screen
  • Fix: Custom signature didn’t appear on the Lock screen
• Status bar, Notification shade
  • New: Screen lights up with an animation now
  • New: Status bar color gradient animation
  • Fix: Notification shade wasn’t displayed correctly in Dark mode
• Home screen
  • New: App drawer allows you to keep your Home screen neat and categorizes apps so you can find them faster.
• Weather
  • New: New animations bring the weather from outside directly to your screen.
• Settings
  • New: Security introduces new comprehensive privacy protection mechanisms.
  • New: Lite mode simplifies your device and brings essential features up front.
• Notes
  • New: You can create folders with notes now.
  • New: New dynamic backgrounds look gorgeous!
  • New: Tasks are completed with a satisfying animation now.
  • New: Checklists of subtasks make managing your agenda much simpler.
• Security
  • New: New animations feel natural and refreshing.
  • New: Binging your favorite shows will be more convenient with our new video toolbox

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Mi 9 Lite MIUI 12.0.2.0 Europe Stable ROM

How To Install Mi 9 Lite MIUI 12.0.2.0 Europe Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)
  • How To Install Stock Firmware OTA Update Zip / Fastboot Files On Xiaomi Devices

The post Download V12.0.2.0.QFCEUXM Mi 9 Lite MIUI 12.0.2.0 Europe Stable ROM appeared first on Root My Galaxy.

Last year, both the Realme X and Realme X2 were one of the budget segment popular smartphones by Realme. Both the devices came with Android 9.0 Pie pre-installed over ColorOS 6 UI. Last year, Realme has also announced its own customized UI ‘Realme UI’ for its devices that run on Android 10. Realme UI brings all the native Android 10 features along with dedicated functionalities as well. This year, both the Realme X and X2 models have received the Android 10 update officially. However, if you’re interested in rollback (downgrade) Realme X and Realme X2 to Android 9 Pie from Android 10 then you can do this by following the guide below.

It’s worth mentioning that Realme UI early beta testing was held initially for the Realme X2 and then the company has announced the early beta for Realme X as well. Realme UI brings plenty of improvements and additional features with visual changes than ColorOS 6 UI.

How to rollback Realme X and Realme X2 to Android 9 Pie from Android 10 (downgrade)

Furthermore, there isn’t any major bug or flaw that arrives for the Realme X/X2 Realme UI update. Still, if in case, you don’t like the new UI that much, the company has officially released the rollback firmware for both the devices along with the guide.

But make sure that the rollback firmware installation process will delete all the device data. So, take a full data backup at first and you will be shifted to Android 9 Pie again which means you won’t be able to use all the essential features of Android 10.

Image may be NSFW.
Clik here to view.

Important Notes:

1. After the rollback, ALL OF YOUR DATA WILL BE ERASED! Please make sure to backup before you proceed.
2. Rollback operation may probabilistic have unforeseeable impacts on your phone.
3. Rollback operation will modify some of the system functions, and prevent you from receiving the latest Realme UI push.
4. If you want to experience the Realme UI version (Based on Android 10) after rollback, you have to manually download the full Realme UI version package from the official website to update.
   Manual package Link: https://www.realme.com/in/support/software-update
5. This package is released and available for Indian users only.

If you’re okay with the important notes then you can proceed. Ensure that you’re running on the software version C.04 on Realme X and C.11 for Realme X2.

Requirements:

• Realme X/X2 having 60% or higher battery level
• Realme UI rollback manual package

Download Links:

• Realme X (Indian Stable) – Rollback Firmware [Android 9 Pie]
• Realme X2 (Indian Stable) – Rollback Firmware [Android 9 Pie]

Steps to rollback Realme X and Realme X2 to Android 9 Pie

• First of all, download the rollback package to the phone storage.
• Copy the package to the phone storage first directory in the File Manager.
• Click on the rollback package > Select ‘Upgrade Now’ if you decide to rollback. (Please do not move your phone until the process finish)
• Finally, restart your handset and wait for the device to boot into the Android 9 Pie system again. It will take a couple of minutes. So, have some patience and enjoy!

Hope you’ve successfully have done (downgrade) rollback Realme X and Realme X2 to Android 9 Pie from Android 10. Keep visiting the blog for more info.

Source: Realme X2 | Realme X (Realme Community)

The post How to rollback (downgrade) Realme X and Realme X2 to Android 9 Pie from Android 10 appeared first on Root My Galaxy.

If you are a Xiaomi Mi Play (lotus) has just received MIUI 11.0.7.0 China Stable ROM (V11.0.7.0.OFICNXM) with July 2020 security patch. The update is a Chinese Stable ROM. If your device is running on a China ROM, only then you will get the update via OTA. Otherwise, you have to install it manually.

Xiaomi has been very good lately in providing regular updates to its devices. The company has been updating its devices on a regular basis. It is providing both Global ROM updates as well as regional ROM like China or Russia ROM updates. The new update is a very important update so we recommend users to update their devices to this update if you are running the older China Stable ROM. For the full changelog, please check below.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. 

The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Mi Play MIUI 11.0.7.0 China Stable ROM. The full firmware file is around 1.9 GB in size so we do recommend users to use WiFi while downloading the firmware file.

Changelog

System

• Updated Android Security Patch to July 2020. Increased system security.

MIUI 11.0.7.0 China Stable ROM {V11.0.7.0.OFICNXM} Details

• Device: Mi Play
• Codename: lotus
• Channel: China Stable
• Version: V11.0.7.0.OFICNXM

DISCLAIMER

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

How To Install Mi Play MIUI 11.0.7.0 China Stable ROM (July security patch)

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Download Xiaomi Mi Play MIUI 11.0.7.0 China Stable ROM {V11.0.7.0.OFICNXM} appeared first on Root My Galaxy.

The Xiaomi Mi Play has been updated to August 2020 security patch update in Russia. The new MIUI 11.0.9.0 Russia Stable ROM (V11.0.9.0.OFIRUXM) is now available for Xiaomi Mi Play. The update is only available in the Russian region. If your device is running on a Russia Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually.

This update addresses various bugs which were previously present. It fixes some bugs in the lock screen, notification shade and status bar. Many users have reported that there was an overlapping issue while taking scrolling screenshot. That issue has been fixed now. It also brings the latest August 2020 security patch update to the device. The update improves the stability of the system as well as the performance.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Mi Play MIUI 11.0.9.0 Russia Stable ROM.

MIUI 11.0.9.0 Russia Stable ROM {V11.0.9.0.OFIRUXM} Details

• Device: Mi Play
• Channel: Russia
• Version: V11.0.9.0.OFIRUXM
• Android:

Changelog

• System
  • Updated Android Security Patch to August 2020

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Mi Play MIUI 11.0.9.0 Russia Stable ROM

• MIUI 11.0.9.0 Russia Stable ROM for Mi Play: Recovery ROM || OTA ROM

How To Install Mi Play MIUI 11.0.9.0 Russia Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Download V11.0.9.0.OFIRUXM Redmi 8 MIUI 11.0.9.0 Russia Stable ROM appeared first on Root My Galaxy.

The Xiaomi Redmi 9 (lancelot) has started getting the MIUI 11.0.7.0 China Stable ROM (V11.0.7.0.QJCCNXM). The update is a Chinese Stable ROM. If your device is running on a China ROM, only then you will get the update via OTA. Otherwise, you have to install it manually.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. 

The update will be available across the Chinese market but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi 9 MIUI 11.0.7.0 China Stable ROM. The full firmware file is around 1.9 GB in size so we do recommend users to use WiFi while downloading the firmware file.

Changelog

Other

• Optimization: Increased system stability
• Optimization: Reduced system lag

MIUI 11.0.7.0 China Stable ROM {V11.0.7.0.QJCCNXM} Details

• Device: Redmi 9
• Codename: lotus
• Channel: China Stable
• Version: V11.0.7.0.QJCCNXM
• Download: Recovery ROM | | Fastboot ROM

DISCLAIMER

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

How To Install Redmi 9 MIUI 11.0.7.0 China Stable ROM (July security patch)

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Download Redmi 9 MIUI 11.0.7.0 China Stable ROM {V11.0.7.0.QJCCNXM} appeared first on Root My Galaxy.

Xiaomi has now started updating Redmi 9 (codenamed lancelot) to the latest August 2020 security patch update. The all-new MIUI 11.0.7.0 Global Stable ROM (V11.0.7.0.QJCMIXM) is now made available for the device. The best part is the full firmware file is now available for download as well.

This new update is a Global Stable ROM. If your device is running on a Global Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 9. The Full firmware size is around 1.7 GB. You can follow our guide to manually flash the full firmware on your device.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi 9 MIUI 11.0.7.0 Global Stable ROM.

MIUI 11.0.7.0 Global Stable ROM {V11.0.7.0.QJCMIXM} Details

• Device: Redmi 9
• Channel: Global Stable
• Version: V11.0.7.0.QJCMIXM
• Android: Android 10

Changelog

Other

• Optimization: Increased system stability
• Optimization: Reduced system lag

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi 9 MIUI 11.0.7.0 Global Stable ROM

• MIUI 11.0.7.0 Global Stable ROM for Redmi 9: Recovery ROM || OTA ROM

How To Install Redmi 9 MIUI 11.0.7.0 Global Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Download V11.0.7.0.QJCMIXM Redmi 9 MIUI 11.0.7.0 Global Stable ROM appeared first on Root My Galaxy.

The latest MIUI 12.0.3.0 Russia Stable ROM with version number V12.0.3.0.QGGRUXM and August 2020 security patch has been rolled out for the Xiaomi Redmi Note 8 Pro.

If your device is running on a Russia Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi Note 8 Pro MIUI 12.0.3.0 Russia Stable ROM.

Image may be NSFW.
Clik here to view.

MIUI 12.0.3.0 Russia Stable ROM – August 2020 security patch update details

• Device: Redmi Note 8 Pro
• Channel: Russia
• Version: V12.0.3.0.QGGRUXM
• Android: Android 10

Changelog

• Highlights
  • MIUI 12. Yours alone.
• System animations
  • New: All-new physically based animation engine with advanced architecture will refresh your device’s look.
  • New: Dynamic window technology takes switching screen orientation to a new level.
  • Optimization: Animations in selected scenes
• System visuals
  • Brand new visual design works for all types of content and languages.
  • Magazine-level layouts bring important things into the spotlight and make content structure clear.
• Control center
  • New: Swipe down from the upper left corner to open Notification shade and from the upper right corner to open Control center
  • New: When Notification shade is open, swipe down from the upper right corner to open Control center
  • Optimization: Control center is now closed by incoming calls
  • Optimization: Press and hold redirection options
  • Fix: Control center wasn’t always displayed correctly in landscape mode
• Dark mode
  • Optimization: Brightness and color improvements for wallpapers in Dark mode
• System
  • Optimization: SIM compatibility issues
  • Fix: Dual apps couldn’t use location services
  • Fix: Emergency broadcast info wasn’t displayed correctly
  • Updated Android Security Patch to August 2020. Increased system security.
• Status bar, Notification shade
  • New: Screen lights up with an animation now
  • New: Status bar color gradient animation
  • Fix: Notification shade wasn’t displayed correctly in Dark mode
• Home screen
  • New: App drawer allows you to keep your Home screen neat and categorizes apps so you can find them faster.
• Weather
  • New: New animations bring the weather from outside directly to your screen.
• Settings
  • New: Security introduces new comprehensive privacy protection mechanisms.
  • New: Lite mode simplifies your device and brings essential features up front.
• Notes
  • New: You can create folders with notes now.
  • New: New dynamic backgrounds look gorgeous!
  • New: Tasks are completed with a satisfying animation now.
  • New: Checklists of subtasks make managing your agenda much simpler.
• Security
  • New: New animations feel natural and refreshing.
  • New: Binging your favorite shows will be more convenient with our new video toolbox

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi Note 8 Pro MIUI 12.0.3.0 Russia Stable ROM

How To Install Redmi Note 8 Pro MIUI 12.0.3.0 Russia Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)
  • How To Install Stock Firmware OTA Update Zip / Fastboot Files On Xiaomi Devices

The post V12.0.3.0.QGGRUXM: Redmi Note 8 Pro MIUI 12.0.3.0 Russia Stable ROM rolls out appeared first on Root My Galaxy.

Though there are plenty of Android smartphones out in the market, in a few years, Oppo’s sub-brand Realme has acquired its position in the Indian market due to its fully-featured smartphones at an affordable price tag. Realme X2 Pro is a perfect example that was launched back in October 2019 with the flagship-grade hardware specifications. It also comes with Android 9.0 Pie out of the box that was based on ColorOS 6. Then Realme has released its own skin called Realme UI which is based on Android 10. Now, if in case, you’ve upgraded your Realme X2 Pro to Android 10 and doesn’t happy with the look or performance and you want to go back then you can do this easily. Check out how to [Roll Back] Downgrade Realme X2 Pro Android 10 to Android 9.0 Pie by following the guide below.

Realme UI features so many new additions or improvements that you may not find on the older version of Android 9 Pie. However, it’s not necessary that everyone will find the latest software version and especially the latest skin. Those who love and find handy to use ColorOS 6 UI on their Realme devices, they’re most welcome and the company has also decided to provide the downgrade version.

So, all the interested users can easily go back to the previous version. However, there are a couple of requirements or you can say useful notes mentioned below that you should read properly before jumping to the Android 9 Pie from the Android 10 (Realme UI 1.0).

Image may be NSFW.
Clik here to view.

[Roll Back] Downgrade Realme X2 Pro Android 10 to Android 9.0 Pie

Make sure that the rollback firmware installation process will delete all the device data. So, take a full data backup at first and you will be shifted to Android 9 Pie again which means you won’t be able to use all the essential features of Android 10.

Important Notes:

1. After the rollback, ALL OF YOUR DATA WILL BE ERASED! Please make sure to backup before you proceed.
2. Rollback operation may probabilistic have unforeseeable impacts on your phone.
3. Rollback operation will modify some of the system functions, and prevent you from receiving the latest Realme UI push.
4. If you want to experience the Realme UI version (Based on Android 10) after rollback, you have to manually download the full Realme UI version package from the official website to update.
   Manual package Link: https://www.realme.com/in/support/software-update
5. This package is released and available for Indian users only.

If you’re okay with the important notes then you can proceed. Ensure that you’re running on the latest software version on your Realme X2 Pro (Indian variant).

Requirements:

• Realme X2 Pro having 60% or higher battery level
• Realme UI rollback manual package

Download Links:

• Realme X2 Pro (Indian Stable) – Rollback Firmware [Android 9 Pie]

Steps to Rollback Realme X2 Pro to Android 9 Pie

• First of all, download the rollback package to the phone storage.
• Copy the package to the phone storage first directory in the File Manager.
• Click on the rollback package > Select ‘Upgrade Now’ if you decide to rollback. (Please do not move your phone until the process finish)
• Finally, restart your handset and wait for the device to boot into the Android 9 Pie system again. It will take a couple of minutes. So, have some patience and enjoy!

Hope you’ve successfully have done (downgrade) rollback Realme X2 Pro to Android 9 Pie from Android 10. Keep visiting the blog for more info.

The post [Roll Back] Downgrade Realme X2 Pro Android 10 to Android 9.0 Pie appeared first on Root My Galaxy.

Recently the Chinese manufacturer Oppo released the OPPO A12 targeting the mid-range mobile market which is quite over-crowded with mobile phones. The device has a lot going for it, from specs to features and design. The Oppo A12 comes with some great specs like Helio P series Octa-core SoC, Dual camera setup and a huge 4230 mAh battery which make it worth consideration.

Just like any device, the Oppo A12 comes on-board with software which runs the device known as stock ROM or firmware flash file. If you own an Oppo A12 (CPH2083 ) and for some reason looking for the Stock ROM file of the device, then we have got you covered here? The latest Stock ROM Version is now made available for download. The firmware is based on Android Os. The firmware is for Qualcomm powered variant of the device only. The Firmware file is large in size so make sure you are connected to a stable WiFi connection while downloading the firmware.

If you are new to the Android ecosystem then let me tell you, stock ROM as the name suggests is the stock or pre-installed firmware which comes with the device. The firmware is developed by the manufacturer for a specific device. So you can’t flash any Stock ROM on your Android device. Every device’s Stock ROM is different. They may be based on Google’s same Android source code but they are different.

There are reasons why users need to flash the Stock Firmware or ROM back on their device. With time users end up downloading hundreds and hundreds of apps which makes the device slow and if they user downloads any wrong app from play store or other unknown sources then the app may slow down the device. The common thing to do in that case is to remove those bad apps but sometimes this doesn’t work and the only thing which a user can do is flashing back the Stock Firmware and restore the device to factory settings.

Oppo A12 Specification

Oppo A12 comes equipped with a decent size 6.2-inch IPS LCD screen with a screen resolution of 720×1520 pixels and 19:9 aspect ratio. There is a waterdrop notch which houses the front camera. Driving the Oppo A12 is an octa-core MediaTek Helio P35 (MT6765) processor coupled with 3GB/4 GB RAM and 64 GB of internal storage which can be expanded up to 256 GB via microSD card through a dedicated SD card slot.

Now coming to the camera department the device sports a dual rear camera which is consists of a 13MP primary sensor and a 2MP depth sensor. On the front side, there is an 8MP camera which resides inside the water-drop notch. The Oppo A12 runs ColorOS 6.1.2 over the top of Android 9 Pie.

The device has all the connectivity options like Wi-Fi 802.11 a/b/g/n, GPS, Bluetooth v5.00, 3G, and 4G (with support for Band 40 employed by some LTE networks in India) with active 4G on both SIM cards. The company has taken care of all the important sensors on the device as well.

Related Post

• [Download] List Of Android Devices Getting Lineage OS 17 (Android 10)

Pre-Requirements:

• Make sure the battery percentage is more than 60%.
• Install the Oppo Mobile Drivers on your PC.
• Install ADB & Fastboot drivers on your computer. Guide – Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows or How to Install ADB and Fastboot on Mac or Linux
• Now, Enable the Developer option. Guide – How to Enable Developer Options & USB Debugging on Android
• Create a full backup on your device How to Backup Important Data On Android (Non-rooted users)
• Download and install the Android USB Driver on your PC.

You can either follow the QPST Tool method or QFIL Tool method in order to install the Stock ROM on your Oppo A12 device.

Download

• CPH2083_11_A.35: Download (Firmware Flash File)

Installation: OPPO A12 CPH2083 Firmware Flash File

Image may be NSFW.
Clik here to view.

1. First, download the right firmware flash file from the download section above
2. Now you can follow our dedicated guide below to flash the firmware on your device

We hope this guide will help you a lot. For any queries, you can comment below.

The post OPPO A12 CPH2083 Firmware flash file (Install Stock ROM) appeared first on Root My Galaxy.

The Xiaomi Mi 10 Pro has started receiving the MIUI 12.0.2.0 Europe Stable ROM (V12.0.2.0.QJAEUXM). The update is exclusive to European region as the name of the update suggests. If your device is running on a Europe Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10. last month the device received the V12.0.1.0.QJAEUXM with August security 2020 patch and the current update also carrying the same security patch.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Mi 10 Pro MIUI 12.0.2.0 Europe Stable ROM.

MIUI 12.0.2.0 Europe Stable ROM – August 2020 security patch update details

• Device: Mi 10 Pro
• Channel: Europe
• Version: V12.0.2.0.QJAEUXM
• Android: Android 10

How To Install Mi 10 Pro MIUI 12.0.2.0 Europe Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device (if available)
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)
  • How To Install Stock Firmware OTA Update Zip / Fastboot Files On Xiaomi Devices

The post V12.0.2.0.QJAEUXM: Mi 10 Pro MIUI 12.0.2.0 Europe Stable ROM rolls out appeared first on Root My Galaxy.

Realme which is relatively a new brand has established itself as one of the major OEMs in the world. The company mainly focuses on the budget and mid-range devices and India is its primary market as it enjoys a huge fanbase in the country. The same thing goes for the Realme 7 Pro. It is a mid-range device which offers great specs and features in its price segment.

As you can tell from the moniker of the device, it replaces Realme 6 Pro which was a very popular device from the company. Just like its predecessor, Realme 7 Pro has also attracted loads of eyeballs. If you are someone who owns the device and wants to flash the stock firmware flash file / Stock ROM then we have got you covered here.

Realme 7 Pro Specifications at a glance

The Realme 7 Pro comes equipped with a 6.40-inch AMOLED display with a resolution of 1080×2400 with a pixel density and 60Hz refresh rate. Powering the device is an octa-core Snapdragon 720G processor coupled with 6 or 8 GB of RAM and a base storage of 128 GB which is easily expandable up to 256 GB using the micro SD card slot.

The Realme 7 Pro sports a quad-camera setup  (64+8+2+2 MP) on the rear, while there is a single 32 MP front camera which resides inside the punch-hole camera cut-out. The Realme 7 Pro houses a 4500 mAh battery which supports a crazy 65W fast charging.

Image may be NSFW.
Clik here to view.

Benefits of Stock ROM

There are reasons why users need to flash the Stock Firmware or ROM on their device. With time users end up downloading hundreds and hundreds of apps which makes the device slow and if they user downloads any wrong app from play store or other unknown sources then the app may slow down the device. The common thing to do in that case is to remove those bad apps but sometimes this doesn’t work and the only thing which a user can do is flashing back the Stock Firmware and restore the device to factory settings.

Image may be NSFW.
Clik here to view.

There are several things which make stock ROM better than Custom ROM. The stock ROMs are stable and get regular updates from the manufacturer. If there is a bug, that usually will be fixed by the next update. Stock ROMs get Google’s Latest Android Security patches via OTA updates on a regular basis which makes them much more secure than the Custom ROMs.

The Advantages Of The Stock Flash File

• Flash Stock To Unbrick your Realme 7 Pro
• Flash Stock ROM to Fix the bootloop problem.
• Upgrade and Downgrade Realme 7 Pro
• Unroot or Fix Bugs on your phone.
• To fix the lag or stutter on Realme 7 Pro
• Revert back to stock to gain your warranty.

Download Realme 7 Pro Stock ROM

• will be added soon

Steps to Install Realme 7 Pro Firmware (Unroot/Unbrick and Fix Bootloap)

There are loads of benefits of having the stock ROM of an Android device. You can Fix Bootloop and Black screen issue by flashing back the stock firmware. If you are facing some software related issues, then you can flash the stock ROM to fix that. You can Unbrick and unroot your device by flashing back the stock firmware which will give you your device’s warranty back.

Disclaimer:

RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach

Pre-Requirements:

• Make sure the battery percentage is more than 60%.
• Download the QPST Tool.
• Install the Swipe Mobile Drivers on your PC.
• Install ADB & Fastboot drivers on your computer. Guide – Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows or How to Install ADB and Fastboot on Mac or Linux
• Now, Enable the Developer option. Guide – How to Enable Developer Options & USB Debugging on Android
• Create a full backup on your device How to Backup Important Data On Android (Non-rooted users)
• Download and install the Android USB Driver on your PC.

You can either follow the QPST Tool method or QFIL Tool method in order to install the Stock ROM on your Realme 7 Pro device.

Method -1: Using Stock Recovery

Guide: How to Install OTA Updates Zip File Via Stock Recovery

Method -2: Using QPST Tool

• First of all, make sure you have followed each and every step mentioned in the pre-requisites section and download the QPST File.

After downloading, you will find two files Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip

• Open the QPST Win folder then Install the QPST.exe on your windows
• Once it is installed, go to the Installed Location on the Main Drive (C)
• Open the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it 
• After that Open the EMMC Software Downloader in the same folder located all the QPST Files
• In EMMC Software Downloader, Check program bootloaders -> Browse for the device com port
• Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (make sure you have extracted the ROM Zip file)
• Click On Load Patch def and browse for patch0.xml in folder ROM
• Check the search path 2 and browse for the folder ROM
• After all this click download, wait for the download to finish (it will find a new driver, install that)
• Now, wait for the process to finish. Once it is done, remove your device from PC and you have installed Stock ROM on Realme 7 Pro.

Method -3: Using QFIL Tool

Step 1: Make sure that your PC has Qualcomm USB drivers installed on it. (If not download and install them, check pre-requirement section)

Step 2: Download the Qualcomm Flash Image Loader (QFIL) on your computer and Extract that using any unzipper app like WinRAR.

Step 3: Now go to the extracted folder and Open QFIL.exe.

Image may be NSFW.
Clik here to view.

Step 4: Once you enter the QFIL tool, you will see the basic user interface of the tool.

Image may be NSFW.
Clik here to view.

Step 5: Now, Switch Off your Smartphone or Tablet.

Image may be NSFW.
Clik here to view.

Step 6: After your Device is powered Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Image may be NSFW.
Clik here to view.

Step 7: Now, In QFIL, Click on Browse Button

Image may be NSFW.
Clik here to view.

Step 8: Now locate the Firmware File (.mbn).

Image may be NSFW.
Clik here to view.

Step 8: Once, you have added the firmware file, the QFIL tool will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process.

Image may be NSFW.
Clik here to view.

Step 10: Like all other devices and tools, this flashing Process will take up to 10-15 minutes to complete. Once the Flashing process is completed your device will be reboot automatically.

We hope this guide will help you a lot. For any queries, you can comment below.

Method 4: Flash Stock Firmware File using MSM Download Tool

• First Download the latest MSM Download Tool
• Make sure you have downloaded the right firmware file and drivers on your PC
• Now put both the MSM tool and the firmware file in the same folder (on your pc)
• After that connect your phone to PC and open the MSM download tool
• If everything goes well, the software will automatically detect the firmware file
• Now click the start button to initiate the flashing process and wait for it to complete
• Once it is completed, reboot your device

So that’s it for the guide. Here we have mentioned all the possible methods to flash the official firmware flash file on Reame 7 Pro. If you have any questions or suggestions, feel free to leave those in the comment section down below.

The post Realme 7 Pro Stock ROM Guide (RMX2170-Firmware Flash File) appeared first on Root My Galaxy.

After the MIUI 12.0.3.0 Russia stable ROM, Xiaomi Redmi Note 8 Pro has started receiving the MIUI 12.0.3.0 Global Stable ROM with version number V12.0.3.0.QGGMIXM and August 2020 security patch. As the name suggests, this is a global ROM, so it will be rolled out globally.

If your device is running on a Global Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10. This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. It addresses the local time naming bug. Now it is more optimised. The has been rolled out as an OTA.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi Note 8 Pro MIUI 12.0.3.0 Global Stable ROM.

Image may be NSFW.
Clik here to view.

MIUI 12.0.3.0 Global Stable ROM – August 2020 security patch update details

• Device: Redmi Note 8 Pro
• Channel: Global
• Version: V12.0.3.0.QGGMIXM
• Android: Android 10

Changelog

System

• Updated Android Security Patch to August 2020. Increased system security.

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi Note 8 Pro MIUI 12.0.3.0 Global Stable ROM

How To Install Redmi Note 8 Pro MIUI 12.0.3.0 Global Stable ROM

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)
  • How To Install Stock Firmware OTA Update Zip / Fastboot Files On Xiaomi Devices

The post Redmi Note 8 Pro: August security with V12.0.3.0.QGGMIXM Global Stable ROM appeared first on Root My Galaxy.

The Xiaomi Redmi 8A Pro (olivewood) has started receiving the MIUI 11.01.0 Indonesia stable ROM with version number V11.0.1.0.QCQIDXM. The update brings August security 2020 patch to the device.

If your device is running on an Indonesia Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 10. The Full firmware size is around 1.81 GB (Full Firmware -recovery). You can follow our guide to manually flash the full firmware on your device.

This update addresses various bugs which were previously present. The update brings performance and stability improvements to the device. Please check the full changelog below.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi 8A Pro MIUI 11.0.1.0 Indonesia Stable ROM.

MIUI 11.0.1.0 Indonesia Stable ROM – update details

• Device: Redmi 8A Pro
• Channel: Russia
• Version: V11.0.1.0.QCQIDXM

Changelog

• System
  • Stable MIUI based on Android 10
• Other
  • Updated Android Security Patch to August 2020. Increased system security.

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi 8A Pro MIUI 11.0.1.0 Indonesia Stable ROM

• MIUI 11.0.1.0 Indonesia Stable ROM for Redmi 8A Pro: Recovery ROM | Fastboot ROM

How To Install Redmi 8A Pro MIUI 11.0.1.0 (v11.0.1.0.QCQIDXM) Indonesia Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post Redmi 8A Pro Indonesia Stable ROM: MIUI 11.0.1.0 August Security 2020 (V11.0.1.0.QCQIDXM) appeared first on Root My Galaxy.

Following the guide, you can Download and Install Stock ROM On Moto X4 [Official Firmware flash file]. This also helps you to Unroot, Unbrick, Fix bootloop and Back to stock. Just like any other Moto devices, the devises stock ROM is very clean and doesn’t have loads of bloatware. It is clean and stable. This is one of the main reason for the device’s performance.

If you own any of the devices and looking for the stock firmware, then we have got you covered here. if you don’t follow the guide correctly you may end up bricking your device. We have collected more information about Moto X4 Stock ROM down if you want you can read it from down.

Android is an open source operating system so there are loads of modified ROMs or firmware commonly known as Custom ROMs are available for Android devices. Users love to root and install these custom ROMs to get more features which were missing from the official firmware. But if the user misses a single step, he/she may brick the android phone and only be installing the stock firmware can restore the device.

The installation process is quite easy just you have to download the required things from the download section. For installing this stock ROM you have to take the help of SP Flash tool software. If you already knew the process of installing then you don’t need to take the help of installation part or if you don’t know the process then you can take the help of the installation part.

Install Official Firmware On Moto X4 (Back to stock, Unbrick, Unroot and Fix Bootloop)

There are loads of benefits of having the stock ROM of an Android device. You can Fix Bootloop and Black screen issue by flashing back the stock firmware. If you are facing some software related issues, then you can flash the stock ROM to fix that. You can Unbrick and unroot your device by flashing back the stock firmware which will give you your device’s warranty back.

Moto X4 Stock ROM Details:

• Download Format: Zip Verison
• Firmware Type: Official
• Tool Supported: ADB and fastboot
• Gapps File: Included
• Device Supported: Moto X4

What Is Stock ROM and What are its benefits?

Image may be NSFW.
Clik here to view.

Stock ROM’s are the ones that come pre-installed on phones or tablets. These are the versions of Android developed by the OEM’s for making their phones look unique. They also come with pre-installed with certain apps.

The reason for the usage of Custom ROM’s over Stock ROM’s are:

1) Security: These ROM’s are developed by big companies and hence there are fewer chances of malware/ virus affecting the phone.

2) Warranty: Installing a Custom ROM needs root access and this voids warranty of your smartphone in most cases. A lot of OEM’s do not allow the root access or customization.

3) Pre-installed apps and features: A lot of these ROM’s come with pre-installed apps which are sometimes useful. These apps vary between different manufacturers and even for models. Some OEM’s also give their customers premium features like Launchers, wallpapers, home screen, etc.

The Advantages Of Moto X4 ’s Stock Firmware

• Flash Stock To Unbrick your Moto X4
• Flash Stock ROM to Fix the bootloop problem.
• Upgrade and Downgrade Moto X4
• Unroot or Fix Bugs on your phone.
• To fix the lag or stutter on Moto X4
• Revert back to stock to gain your warranty

Download Moto X4 Flash File / Stock ROM

Steps To Install Official Stock ROM On Moto X4 (Unbrick/Unroot)

Here is our comprehensive guide to flash the stock firmware a.ka ROM on Moto X4

Disclaimer:

RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach

Pre-Requirements:

• Make sure battery percentage is more than 60%
• Install the VCOM driver on your phone.
• Install ADB & Fastboot drivers on your computer. Guide Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows or How to Install ADB and Fastboot on Mac or Linux
• Now Enable Developer option. Guide How to Enable Developer Options & USB Debugging on Android
• Create a nandroid backup on your device How To Create & Restore Nandroid Backup On Android Devices

Image may be NSFW.
Clik here to view.

Method 1:

This is adb sideload method. For this, you need to download the right firmware file, install the ADB and Fastboot tool along with Motorola USB Drivers. After doing all these required things, follow the linked guide:

 | Guide: How to Use ADB Sideload to Install ROMs and Mods On Android

Method 2:

• Save the downloaded firmware into the ADB installation directory
• Open the ADB folder and click shift+right click and open command here
• Connect your device to PC and boot the device into bootloader mode by pressing and holding power button and volume down button
• Enter the following commands on to the command window:

  mfastboot flash partition gpt.bin
  mfastboot flash bootloader bootloader.img
  mfastboot reboot-bootloader
  mfastboot flash modem NON-HLOS.bin
  mfastboot flash fsg fsg.mbn
  mfastboot erase modemst1
  mfastboot erase modemst2 
  mfastboot flash bluetooth BTFM.bin
  mfastboot flash dsp dspso.bin
  mfastboot flash logo logo.bin
  mfastboot flash boot boot.img
  mfastboot flash system system.img_sparsechunk.0
  mfastboot flash system system.img_sparsechunk.1
  mfastboot flash system system.img_sparsechunk.2
  mfastboot flash system system.img_sparsechunk.3
  mfastboot flash system system.img_sparsechunk.4
  mfastboot flash system system.img_sparsechunk.5
  mfastboot flash system system.img_sparsechunk.6
  mfastboot flash system system.img_sparsechunk.7
  mfastboot flash system_b system_other.img
  mfastboot flash oem oem.img
  mfastboot erase carrier
  mfastboot erase userdata
  mfastboot erase ddr
  fastboot reboot

Hope you are clear with the installation guide. If you have any queries please leave a comment below.

The post Moto X4 Stock ROM (XT1900-1 / XT1900-2 Firmware Flash File) appeared first on Root My Galaxy.

Here is our detailed guide on how to download and install/flash Stock ROM On Motorola One Vision [Official Firmware flash file]. This guide is only applicable for model number XT1970-1, XT1970-2 and XT1970-3. This guide will you to Unroot, Unbrick, Fix bootloop and Back to stock. Just like any other Moto devices, the devises stock ROM is very clean and doesn’t have loads of bloatware. It is clean and stable. This is one of the main reason for the device’s performance.

Android is an open-source operating system so there are loads of modified ROMs or firmware commonly known as Custom ROMs are available for Android devices. Users love to root and install these custom ROMs to get more features which were missing from the official firmware. But if the user misses a single step, he/she may brick the android phone and only be installing the stock firmware can restore the device.

If you own any of the devices and looking for the stock firmware, then we have got you covered here. if you don’t follow the guide correctly you may end up bricking your device. We have collected more information about Motorola One Vision Stock ROM down if you want you can read it from down.

The installation process is quite easy just you have to download the required things from the download section. For installing this stock ROM you have to take the help of SP Flash tool software. If you already knew the process of installing then you don’t need to take the help of installation part or if you don’t know the process then you can take the help of the installation part.

Install Official Firmware On Motorola One Vision (Back to stock, Unbrick, Unroot and Fix Bootloop)

There are loads of benefits of having the stock ROM of an Android device. You can Fix Bootloop and Black screen issue by flashing back the stock firmware. If you are facing some software related issues, then you can flash the stock ROM to fix that. You can Unbrick and unroot your device by flashing back the stock firmware which will give you your device’s warranty back.

Motorola One Vision Stock ROM Details:

• Download Format: Zip Verison
• Firmware Type: Official
• Tool Supported: ADB and fastboot
• Gapps File: Included
• Device Supported: Motorola One Vision

What Is Stock ROM and What are its benefits?

Image may be NSFW.
Clik here to view.

Stock ROM’s are the ones that come pre-installed on phones or tablets. These are the versions of Android developed by the OEM’s for making their phones look unique. They also come with pre-installed with certain apps.

The reason for the usage of Custom ROM’s over Stock ROM’s are:

1) Security: These ROM’s are developed by big companies and hence there are fewer chances of malware/ virus affecting the phone.

2) Warranty: Installing a Custom ROM needs root access and this voids warranty of your smartphone in most cases. A lot of OEM’s do not allow the root access or customization.

3) Pre-installed apps and features: A lot of these ROM’s come with pre-installed apps which are sometimes useful. These apps vary between different manufacturers and even for models. Some OEM’s also give their customers premium features like Launchers, wallpapers, home screen, etc.

The Advantages Of Motorola One Vision ’s Stock Firmware

• Flash Stock To Unbrick your Motorola One Vision
• Flash Stock ROM to Fix the bootloop problem.
• Upgrade and Downgrade Motorola One Vision
• Unroot or Fix Bugs on your phone.
• To fix the lag or stutter on Motorola One Vision
• Revert back to stock to gain your warranty

Download Motorola One Vision Flash File / Stock ROM

Steps To Install Official Stock ROM On Motorola One Vision (Unbrick/Unroot)

Image may be NSFW.
Clik here to view.

Here is our comprehensive guide to flash the stock firmware a.ka ROM on Motorola One Vision

Disclaimer:

RootMyGalaxy.net is not responsible for any damage happened to your device(s) while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach

Pre-Requirements:

• Make sure battery percentage is more than 60%
• Install the VCOM driver on your phone.
• Install ADB & Fastboot drivers on your computer. Guide Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows or How to Install ADB and Fastboot on Mac or Linux
• Now Enable Developer option. Guide How to Enable Developer Options & USB Debugging on Android
• Create a nandroid backup on your device How To Create & Restore Nandroid Backup On Android Devices

Method 1:

This is adb sideload method. For this, you need to download the right firmware file, install the ADB and Fastboot tool along with Motorola USB Drivers. After doing all these required things, follow the linked guide:

 | Guide: How to Use ADB Sideload to Install ROMs and Mods On Android

Method 2:

• Save the downloaded firmware into the ADB installation directory
• Open the ADB folder and click shift+right click and open command here
• Connect your device to PC and boot the device into bootloader mode by pressing and holding power button and volume down button
• Enter the following commands on to the command window:

  mfastboot flash partition gpt.bin
  mfastboot flash bootloader bootloader.img
  mfastboot reboot-bootloader
  mfastboot flash modem NON-HLOS.bin
  mfastboot flash fsg fsg.mbn
  mfastboot erase modemst1
  mfastboot erase modemst2 
  mfastboot flash bluetooth BTFM.bin
  mfastboot flash dsp dspso.bin
  mfastboot flash logo logo.bin
  mfastboot flash boot boot.img
  mfastboot flash system system.img_sparsechunk.0
  mfastboot flash system system.img_sparsechunk.1
  mfastboot flash system system.img_sparsechunk.2
  mfastboot flash system system.img_sparsechunk.3
  mfastboot flash system system.img_sparsechunk.4
  mfastboot flash system system.img_sparsechunk.5
  mfastboot flash system system.img_sparsechunk.6
  mfastboot flash system system.img_sparsechunk.7
  mfastboot flash system_b system_other.img
  mfastboot flash oem oem.img
  mfastboot erase carrier
  mfastboot erase userdata
  mfastboot erase ddr
  fastboot reboot

Hope you are clear with the installation guide. If you have any queries please leave a comment below.

The post Motorola One Vision Stock ROM (XT1970-1, XT1970-2, XT1970-3 Firmware Flash File) appeared first on Root My Galaxy.

Samsung is one of the very few Android manufacturers to still produce Android smart tablets. The company has also been very active when it comes to updating its tablets to the latest security updates. Samsung has also announced that newer Galaxy tablets will be getting 3 years of Android update which is insanely good.

Here in this article, we will be sharing Samsung Galaxy Tab S7 Plus Stock Firmware (Flash File) so that in case of any emergency you can revert back to / restore to the stock ROM. We will also be tracking all the updates the Samsung Tab S7 Plus gets.

We have provided all the required download links for drivers, tools, and firmware also along with installation steps guide for your ease. This guide will be helpful if you brick your device somehow. So do read and follow the steps as given.

Specs Overview – Galaxy Tab S7 Plus

The Galaxy Tab S7 Plus comes equipped with a large 12.4-inch OLED panel with a resolution of 2800 x 1752 and a refresh rate of 120Hz. The display features a 16:10 ratio. Under the hood, there is a Qualcomm Snapdragon 865 Octa-core CPU coupled with Adreno 650 GPU, 6GB RAM, and 128GB internal storage (supports sd card expansion). It runs Android 10 OS with OneUI 2.0 custom skin on top.

The  Samsung Galaxy Tab S7 features a dual rear camera (13MP main + 5 MP ultra-wide). On the front side, it sports an 8-megapixel camera sensor. The Samsung Galaxy Tab S7+ houses a mammoth 10,090mAh battery and supports up to 45W fast charging but it comes along with 15W charger within the box.

Samsung has provided S Pen support with Air Gestures and Microsoft Office integration. It is a  5G enabled device. It also has 4G, Wi-Fi 6, Bluetooth v5.0, GPS/ A-GPS, and a USB Type-C port etc.

About Stock ROM

There are two types of ROMs in Android ecosystem. As I mentioned above one is Stock ROM or the Firmware which comes preinstalled with any Android device and the second one is Custom ROM or commonly known as ROM. Custom ROMs are developed by third-party developers for a specific device. Most of the Custom ROMs are feature-packed and fast which makes them a better alternative to the stock firmware.

Pre-Requirements:

• Make sure the battery percentage is 60% or above.
• Install ADB & Fastboot drivers on your computer. Guide > Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows | Install ADB and Fastboot on Mac or Linux
• Enable the Developer options on your device. Guide > How to Enable Developer Options & USB Debugging on Android
• Create a Nandroid backup on your device > How To Create & Restore Nandroid Backup On Android Devices
• You will require a Windows/Mac PC or Laptop and a USB cable.
• Download all the required files such as firmware, tools, drivers from below. Then proceed to the installation part.

Where and How to Download Galaxy Tab S7 Plus Stock ROM/ Firmware (Update Tracker)

• T975XXU1ATI2 September Security Patch (Latest)

OR

You can download any Galaxy firmware using Samfirm Tool, Guide: Download Latest Galaxy Firmware using SamFirm Tool

Or

Using  Frija Samsung Firmware Download Tool

• Download ODIN Latest Built
• Download Samsung USB Drivers

Steps to Install Stock Firmware On Galaxy Tab S7 Plus (Unbrick/Unroot/Back To Stock)

Image may be NSFW.
Clik here to view.

1. Download Stock Firmware for Galaxy Tab S7 Plus or Note 10+ from the download section above.
2. After downloading the latest ODIN flash tool from the above link, install it on your computer.
3. Now, follow our in-depth guides on how to download and install official Samsung firmware files via Odin!

How to Install Samsung Stock ROM via Odin Tool

Hope this guide is helpful to you and you have successfully installed the Stock Firmware on your Galaxy Tab S7 Plus or Note 10+ device. Feel free to ask in the comments below if you have any queries.

The post Samsung Galaxy Tab S7 Plus Stock Firmware (Flash File) – Update Tracker appeared first on Root My Galaxy.

Samsung has a great record when it comes to budget devices. The company has a great hold in markets like India in the budget and mid-segment. The Samsung Galaxy M01 is a mid-range device from the company which was launched in June 2020 with Android 10 on the top of One UI 2.0

Here in this article, we will be sharing Samsung Galaxy M01 Stock Firmware (Flash File) so that in case of any emergency you can revert back to / restore to the stock ROM. We will also be tracking all the updates the Samsung Tab S7 Plus gets.

We have provided all the required download links for drivers, tools, and firmware also along with installation steps guide for your ease. This guide will be helpful if you brick your device somehow. So do read and follow the steps as given.

Specs Overview – Galaxy M01

The Galaxy M01 comes equipped with 5.7 inches PLS TFT capacitive touchscreen display with a resolution of 720 x 1520 pixel. The display features a 19:9 ratio. Under the hood, there is a Qualcomm SDM439 Snapdragon 439 Octa-core CPU coupled with Adreno 505 GPU, 3GB RAM, and 32 GB internal storage (supports sd card expansion). It runs Android 10 OS with OneUI 2.0 custom skin on top.

The  Samsung Galaxy Tab S7 features a dual rear camera (13MP primary+ 2 MP). On the front side, it sports a 5-megapixel camera sensor. The Samsung Galaxy Tab S7+ houses a non-removable Li-Ion 4000 mAh battery.

About Stock ROM

There are two types of ROMs in Android ecosystem. As I mentioned above one is Stock ROM or the Firmware which comes preinstalled with any Android device and the second one is Custom ROM or commonly known as ROM. Custom ROMs are developed by third-party developers for a specific device. Most of the Custom ROMs are feature-packed and fast which makes them a better alternative to the stock firmware.

Pre-Requirements:

• Make sure the battery percentage is 60% or above.
• Install ADB & Fastboot drivers on your computer. Guide > Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows | Install ADB and Fastboot on Mac or Linux
• Enable the Developer options on your device. Guide > How to Enable Developer Options & USB Debugging on Android
• Create a Nandroid backup on your device > How To Create & Restore Nandroid Backup On Android Devices
• You will require a Windows/Mac PC or Laptop and a USB cable.
• Download all the required files such as firmware, tools, drivers from below. Then proceed to the installation part.

Where and How to Download Galaxy M01 Stock ROM/ Firmware (Update Tracker)

• M015GXXU1ATD5 April 2020 Security Patch

OR

You can download any Galaxy firmware using Samfirm Tool, Guide: Download Latest Galaxy Firmware using SamFirm Tool

Or

Using  Frija Samsung Firmware Download Tool

• Download ODIN Latest Built
• Download Samsung USB Drivers

Steps to Install Stock Firmware On Galaxy M01 (Unbrick/Unroot/Back To Stock)

Image may be NSFW.
Clik here to view.

1. Download Stock Firmware for Galaxy M01 or Note 10+ from the download section above.
2. After downloading the latest ODIN flash tool from the above link, install it on your computer.
3. Now, follow our in-depth guides on how to download and install official Samsung firmware files via Odin!

How to Install Samsung Stock ROM via Odin Tool

Hope this guide is helpful to you and you have successfully installed the Stock Firmware on your Galaxy M01 or Note 10+ device. Feel free to ask in the comments below if you have any queries.

The post Samsung Galaxy M01 Stock Firmware (Flash File) – Update Tracker appeared first on Root My Galaxy.

Xiaomi has started rolling out the latest September 2020 security patch update to Redmi Note 9 Pro (codenamed joyeuse). The all-new MIUI 11.0.7.0 Global Stable ROM (V11.0.7.0.QJZMIXM) is now made available for the device. The best part is the full firmware file is now available for download as well.

This new update is a Global Stable ROM. If your device is running on a Global Stable ROM, only then you will get the update via OTA. Otherwise, you have to install it manually. The update is based on Android 9. The Full firmware size is around 1.7 GB. You can follow our guide to manually flash the full firmware on your device.

If your device is not rooted, then your device may have received the update. You can manually check whether the update is available in your region or not. Go to Settings –> About Phone –> Check for Software Update. The update will be available across the globe but as it is being rolled out in a phased manner, it may take some time to be available in every region, but if you want you can manually download and Install Redmi Note 9 Pro MIUI 11.0.7.0 Global Stable ROM.

MIUI 11.0.7.0 Global Stable ROM {V11.0.7.0.QJZMIXM} Details

• Device: Redmi Note 9 Pro
• Channel: Global Stable
• Version: V11.0.7.0.QJZMIXM
• Android: Android 10

Changelog

System

• Updated Android Security Patch to September 2020. Increased system security

Disclaimer

RootMyGalaxy.net is not responsible for any hardware/software issues that occur on your device(s) by following this guide. We are certain that the following guide is carefully written, avoiding any mistakes on our side. If you are unsure of the causalities that may occur if the procedure goes wrong, then please don’t proceed.

Pre-Requisites

• Have a backup of all your data just to be on the safe side if any incident happens.
• Must Have the bootloader unlocked.
• USB Debugging must be enabled.
• Make sure that the device has more than 50% battery percentage.

Download Redmi Note 9 Pro MIUI 11.0.7.0 Global Stable ROM

• MIUI 11.0.7.0 Global Stable ROM for Redmi Note 9 Pro: Recovery ROM || Fastboot ROM

How To Install Redmi Note 9 Pro MIUI 11.0.7.0 Global Stable ROM

Image may be NSFW.
Clik here to view.

• Download the firmware file and save that in your device
• Now follow the guide given below to install the ROM manually (follow the recovery ROM (zip) guide)

The post V11.0.7.0.QJZMIXM: Redmi Note 9 Pro MIUI 11.0.7.0 Global Stable ROM (September security 2020) appeared first on Root My Galaxy.